|3F, Building B, Xingshun Industry Zone, Chang'an Town, Dongguan, Chinaemail@example.com|
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||3-15 workdays|
|Payment Terms:||L/C, , T/T, Western Union, MoneyGram|
|Product Name:||220V 50HZ Pressure Dew Point 2~10 Degree 6.5m3/min Cooling Dryer||Power:||220V 50HZ|
|Pressure Dew Point:||2~10 Degree||Capacity FAD:||6.5m3/min|
220V 50HZ Pressure Refrigerated Air Dryer Dew Point 2~10 Degree 6.5 M3 / Min Cooling
220V 50HZ power dryer
pressure dew point 2~10 degree
Use refrigerant and compressed air for heat exchange, the compressed air temperature range from 2 to10 ℃ pressure dew point. With the development of Cooling dry machine industry continues, more and more enterprises to enter the air compressor industry, more and more people favor the cooling dry machine industry, while many companies are very outstanding.
Cooling dry have many types, according to the condenser cooling method is divided into air-cooled and water-cooled ; according to the high and low inlet temperature into the air temperature (80 ℃ below) and Normal temperature intake type ( about 45 ℃ ); according to the working pressure is divided into ordinary type (0.3-1.0MPa) and medium, high pressure type (1.2MPa or more).
In addition, many special specifications of the cooling dry machine can be used to deal with non-air type of media, such as: carbon dioxide, hydrogen, natural gas, blast furnace gas, nitrogen, etc.
Noted for Use
1) Do not place in the sun, rain, wind or relative humidity greater than 85% of the place. Do not place in dusty, corrosive or combustible gas environment. Do not place in a place where there is a risk of vibration or condensation. Do not get too close to the wall to avoid poor ventilation. In the case of a corrosive gas, a desiccant dryer or a stainless steel heat exchanger type drier shall be used. Should be used in the ambient temperature below 40 ℃.
2) Do not error connection the compressed air inlet. For ease of maintenance, to ensure that the maintenance of space, should be set up bypass pipeline. To prevent the vibration of the air compressor to the dryer. Piping weight should not be added directly to the dryer.
3) Do not stand up the drain pipe, do not discount or crush.
4) The supply voltage is allowed to fluctuate less than ± 10%. Should be set to the appropriate capacity of the leakage circuit breakers. Must be grounded before use.
If you have any question, please contact us