|3F, Building B, Xingshun Industry Zone, Chang'an Town, Dongguan, Chinafirstname.lastname@example.org|
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||3~15 workdays|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Product Name:||Permanent Magnet Motor Frequency Converter Compressor||FAD Capacity:||7.1 Cbm/min/7 Bar|
|Drive:||Direct Drive||Power Supply:||220V/50HZ, Or As Your Demands|
|Color:||Grey, White, Or As Your Demands||Outer Pipe:||Rp1-1/2imch|
|Noise:||<=75 DB(A)||Power Source:||AC Power|
|Condition:||New||Cooling Method:||Air Cooling|
Electrical Saving Compressor
Permanent Magnet Motor Compressor
Frequency Converter Screw Air Compressor
|The Double Stage PM VFD Screw Compressor--Technical Parameter.|
|Capacity FAD||M3/MIN Mpa||2.9/0.7 2.8/0.8 2.4/1.0 2.2/1.3||3.6/0.7 3.5/0.8 2.9/1.0 2.5/1.3||4.2/0.7 4.1/0.8 3.5/1.0 3.2/1.3||6.4/0.7 6.3/0.8 4.9/1.0 4.2/1.3||7.1/0.7 7.0/0.8 5.8/1.0 5.4/1.3||9.8/0.7 9.7/0.8 7.8/1.0 6.5/1.3||12.2/0.7 12/0.8 9.6/1.0 8.6/1.3||16.8/0.7 16.5/0.8 12.5/1.0 11.2/1.3|
|Compress Stage||Double Stage|
|Ambient temperature||‘-5 centigrade -+45 centigrade|
|Permanent magnet frequency||YES|
|Outlet Air Temperature||centigrade||<= Ambient temperature +-15 centigrade|
|Drive Method||Direct Drive|
|Start Method||Permanent magnet frequency Start|
|Outlet Air Pipe||RP11/2||RP2|
As the air compressor motor speed and the actual power consumption of the compressor into a power relationship, reduce the motor speed will reduce the actual consumption of power inverter air compressor is a real-time pressure sensor system with the gas pressure and gas consumption. Through the precise control of electrical control and frequency conversion, the motor speed (output power) can be controlled instantly without changing the torque of the compressor motor (ie, the ability to drag the load).
In response to the system pressure by changing the compressor speed , And to maintain a stable system pressure (set point), in order to achieve high quality air pressure on demand output. When the system consumes less air volume, when the compressor provides compressed air is greater than the system consumption, inverter compressor will reduce the speed, while reducing the output of compressed air flow; the other hand, increase the motor speed increase the compressed air volume, in order to maintain a stable system Pressure value. It is the same as fan motor water pump energy saving, according to the load change, control input voltage frequency, with the same principle of the inverter energy-saving effect is as follows:
1, the frequency of air compressor pressure setting can be a little, that can meet the requirements of the production equipment, the minimum pressure as the set pressure, the frequency of air compressor pressure will fluctuate under the trend of the pipe network to adjust the speed of air compressor speed , Or even eliminate the air compressor unloading operation, saving energy.
2, the frequency of air compressor makes the pipe network under the pressure stability, can reduce or even eliminate the pressure fluctuations, so that the system of all the air compressors are running to meet the production requirements of a lower pressure to run, reducing the pressure upward Fluctuation caused by the power loss.
3, because the compressor can not be ruled out at full load the possibility of long-running, so only according to the maximum demand to determine the capacity of the motor, so the design capacity is generally too large. In actual operation, the proportion of light load running time is very high. Such as the use of frequency control, can greatly improve the operating efficiency. Therefore, energy-saving potential is great.
4, some adjustment methods (such as adjusting the valve opening and changing the angle of the blade, etc.), even in the case of small demand, it can not reduce the motor running power. After adopting the frequency conversion velocity modulation, when the demand quantity is smaller, may reduce the electrical machinery the rotational speed, reduces the electrical machinery the movement power, thus further realizes the energy conservation.
5, single-motor drive systems are mostly not according to the severity of the load continuously adjusted. The use of frequency control, you can easily carry out continuous adjustment, to maintain pressure, flow, temperature and other parameters of stability, thus greatly improving the performance of the compressor.
Q1: Are you manufacturer or trade company?
A1:We are manufacturer.
Q2: What the exactly address of your factory?
A2: Our company is located in 3F, building B, No.168, Dezheng East Road, Chang’An Town, Dongguan City, Guangdong Province, China
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: How about payment terms?
A4: 30% TT deposit + 70% TT before shipment, 50% TT deposit + 50% LC balance.
Q5: How long will you take to arrange production?
A5: If in stock, we will shipping it in 3 workdays; if no stock or have some special requests, like change the color or change 380V/50HZ to other electricity, we will delivery it in 15workdays.
Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.
If you have any question, please let me:
email & skype: email@example.com